XR303015
Click for picture |
Alu Susp. Adjust. Bulkhead
Rear right Susp. Adjust. bulkhead, CNC-machined and hard coated T6 duraluminum, with eccentric nylon hubs will enable you to adjust the tightness of the rear belts.
Part number XR303015
This part has been superceded by XR302001 Click for more details of new item
|
XR303025
Click for picture |
Alu Susp. Adjust. Bulkhead
Rear left Susp. Adjust. bulkhead, CNC-machined and hard coated T6 duraluminum, with eccentric nylon hubs will enable you to adjust the tightness of the rear belts.
Part number XR303025
This part has been superceded by XR302001 Click for more details of new item
|
XR303091
Click for picture |
Ultra-Tune Shock Tower Rear
CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite. Numerous positioning holes for upper shock mounting as well as upper camber link mounting. These strategically-placed positioning holes provide ultimate tunability of your
Part number XR303091
This part has been superceded by XR303093 Click for more details of new item
|
XR303093
Click for picture |
Shock Tower Rear - 2.5 mm
CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite. Optimized positioning holes for upper shock mounting as well as upper camber link mounting
Part number XR303093
This item has been discontinued
|
XR303115
Click for picture |
Alu Rear Arm with 3 Shock
CNC-machined high-quality aluminum rear lower arm with 3 different shock mounting positions. The arm is hard coated for a long life.
Part number XR303115
This item has been discontinued
|
XR303200
Click for picture |
Adj. Rear Turnbuckle L/R 25 mm
Adjustable turnbuckle set for adjusting camber of rear uprights. Includes four molded ball joints and two turnbuckles manufactured from world-renowned top-secret "Hudy Spring Steel".
Part number XR303200
This item has been discontinued
|
XR303220
Click for picture |
Ball Joint 5.8mm
Molded ball joints 5.8mm (Set of four).
Part number XR303220
This item has been discontinued
|
XR303240
Click for picture |
Ball Universal 5.8 mm Hex
Ball 5.8mm, for connection to molded ball joints. Set of four ball joints and mounting screws.
Part number XR303240
This item has been discontinued
|
XR303355
Click for picture |
Alu Upright Rear for C-Hub
CNC-machined rear upright for C-hub suspension is made from highest-quality
duraluminum. Can be used on either left or right side. Includes two nylon
bushings for ball-bearings.
Part number XR303355
This item has been discontinued
|
XR303010
Click for picture |
Alu Suspension Bulkhead Rear Right - Hard Coated
Rear right bulkhead, CNC-machined and hard coated T6 duraluminum, with nylon covers for ball-bearings.
Part number XR303010
This part has been superceded by XR302001 Click for more details of new item
|
XR303020
Click for picture |
Alu Suspension Bulkhead Rear Left - Hard Coated
Rear left bulkhead, CNC-machined and hard coated T6 duraluminum, with nylon covers for ball-bearings.
Part number XR303020
This part has been superceded by XR302001 Click for more details of new item
|
XR303030
Click for picture |
Alu Roll Center Bridge
A great, stylish-looking option part CNC machined from high-quality duraluminum will not only add executive look of your T1 but will also enable you to adjust the roll center very easily with 2 different roll center mounting positions.
Part number XR303030
This part has been superceded by XR303031 Click for more details of new item
|
XR303090
Click for picture |
Shock Tower Rear - 2.5mm Graphite
CNC-machined rear shock tower made from highest-quality 2.5mm woven graphite.
Part number XR303090
This part has been superceded by XR303093 Click for more details of new item
|
