HomeProductssupportContact usLinksNewslogout




Part Number

New
The new
XB8-EC
>> More info

The new
XT8 truggy
>> More info

The new NT1 Nitro touring car
>> More info


Current Cars
XB8R Nitro Buggy
M18 Micro Car
M18T Mini Truck
M18MT Mini Monster Truck
NT18 Nitro Car
NT18T Nitro Micro Truck

 

Show All Front Suspension

Alu Susp. Adjustable Bulk Head
Complete set of four ôEuro-styleö alu bulkheads, standard in XRAY T1 Factory Kit. Includes four eccentric nylon hubs and plastic covers for ball-bearings
Part number: XR302001 £74.99 Click for more details
Quantity
Alu Susp. Adjustable
Complete set of four Swiss 7075 T6 alu bulkheads for XRAY T1FK?05
Part number: XR302002 £64.99 Click for more details
Quantity
Composite Hub for Ball-Bearing
New molded special nylon hubs for ball-bearings 10x15x4 that are pressed into both front and rear bulkheads.
Part number: XR302012 £2.99 Click for more details
Quantity
Alu Susp. Adjust. Bulkhead
Ultra-light, ultra-strong front lower bulkheads, CNC-machined from premium Swiss T6 7075 aluminum. Identical left and right sides. Fits XRAY T2.
Part number: XR302017 £14.99 Click for more details
Quantity
T2 007 Alu Front Lower Susp.
CNC-machined front lower suspension bulkhead made from premium Swiss T6 7075 aluminum
Part number: XR302018 £14.99 Click for more details
Quantity
Alu Upper Clamp for Bulkheads
Ultra-light, ultra-strong upper clamp for bulkheads, CNC-machined from premium Swiss T6 7075 aluminum. Identical left/right and front/rear. Fits XRAY T2.
Part number: XR302022 £7.99 Click for more details
Quantity
Alu Nut for Susp. Pivot
CNC-machined alu nut that holds front lower molded lower suspension holders. Set of two.
Part number: XR302032 £3.99 Click for more details
Quantity
Alu Nut For Susp. Holder
CNC-machined alu nut holds lower molded suspension holders. Set of 2, fits XRAY T2 only.
Part number: XR302033 £3.99 Click for more details
Quantity
Lower Suspension Holder
Molded holders for lower suspension pivot pins. Set of four.
Part number: XR302040 £2.99 Click for more details
Quantity
Lower Eccentric Suspension
Set of molded composite lower suspension pin holders. The suspension holders have a 0.75mm eccentric hole that lowers the rear roll center
Part number: XR302041 £4.99 Click for more details
Quantity
Lower Suspension Holder
Molded holders for lower suspension pivot pins. Marked for easy identification. Set of 12.
Part number: XR302042 £3.99 Click for more details
Quantity
Lower Suspension Holders T2
Molded composite lower suspension pin holders for use in XRAY T2.
Part number: XR302044 £3.99 Click for more details
Quantity
Alu Lower Susp. Holder
CNC-machined alu brace that aligns and supports the molded lower suspension holders.
Part number: XR302053 £3.99 Click for more details
Quantity
Upper Susp. Holder + C-Clips
Molded holder set for front upper suspension pivot pins. Complete set of molded holders, O-rings, clips, and setscrews.
Part number: XR302060 £3.99 Click for more details
Quantity
Alu Eccentric Front Upper
For steering setting and fine tuning. High-quality CNC machined aluminum arm holders are a great add-on for your T1 to help you fine tune your steering.
Part number: XR302065 £15.99 Click for more details
Quantity
Eccentric Composite Hub
Set of nylon hubs includes: four eccentric hubs for differential ball-bearings, two non-eccentric hubs for layshaft ball-bearings. Eccentric hubs allow for tightening and loosening of front and rear drive belts.
Part number: XR302070 £2.99 Click for more details
Quantity
Eccentric Nylon Hub for
Set of two pairs of composite eccentric hubs for #302002 alu bulkheads for XRAY T1FK?05
Part number: XR302074 £4.99 Click for more details
Quantity
T2 Set of Composite Hubs for Bulkheads (4+2)
Set of molded composite hubs for XRAY T2 includes : 4 eccentric hubs for differential ball-bearings, 2 non-eccentric hubs for layshaft ball-bearings.
Part number: XR302076 £5.5 Click for more details
Quantity
T2 008 Set Of Eccentric Composite Hubs 1 For Bulkheads (4+2)
Set of 1mm-offset molded composite eccentric hubs support ball-bearings for differentials (4 hubs) and center layshaft (2 hubs). Fits XRAY T2’008.
Part number: XR302077 £3.99 Click for more details
Quantity
Caster Clips Set 4+3+2+1mm (2)
Molded clips for adjusting caster and wheelbase. Two sets of 4 clips.
Part number: XR302080 £2.99 Click for more details
Quantity
T2 008 Shock Tower Front 3.0mm Graphite
CNC-machined front shock tower made from 3mm premium graphite material to guarantee maximum strength and long life.
Part number: XR302087 £13.99 Click for more details
Quantity
T2R FRP Shock Tower Front
CNC-machined FRP front shock tower for XRAY T2R includes multiple shock mounting positions and XRAY Quick Roll CenterT positions
Part number: XR302088 £9.99 Click for more details
Quantity
Ultra-Tune Shock Tower Front
CNC-machined from 2.5mm top-quality graphite, this front shock tower for the C-hub suspension offers numerous shock upper mounting positions, as well as numerous mounting positions for front upper suspension link.
Part number: XR302093 £12.99 Click for more details
Quantity
Shock Tower Front Factory Kit
CNC-machined high-quality graphite front shock tower. Features new shock positions for better suspension adjustment, and new front roll center positions
Part number: XR302096 £12.99 Click for more details
Quantity
Composite Shock Tower Front
Molded front shock tower for use with C-hub suspension as well as pivotball suspension. Features multiple shock mounting positions, as well as numerous mounting positions for front upper suspension link.
Part number: XR302097 £3.99 Click for more details
Quantity
Shock Tower Front 3.0mm
CNC-machined 3mm graphite front shock tower for XRAY T2 features optimized shock mounting positions and new Quick Roll Center? positions
Part number: XR302098 £13.99 Click for more details
Quantity
Shock Tower Front 1/12
CNC-machined top-quality graphite front shock tower offers numerous shock upper mounting positions, as well as numerous mounting positions for front C-hub upper suspension links
Part number: XR302099 £12.99 Click for more details
Quantity
Suspension Arm Front Lower
Molded front lower suspension arm. May be used on either left or right sides. Additional shock mounting positions.
Part number: XR302111 £2.99 Click for more details
Quantity
Suspension Arm Front Upper Right
Molded front upper right suspension arm.
Part number: XR302130 £2.99 Click for more details
Quantity
Suspension Arm Front Upper Right - Short
Molded front upper right suspension arm for use with updated, wider steering blocks.
Standard on T1 EVO2 "FREEDOM OF CHOICE" version.
Part number: XR302131 £3.99 Click for more details
Quantity
Suspension Arm Front Upper Left - Short
Molded front upper left suspension arm for use with updated, wider steering blocks.
Standard on T1 EVO2 "FREEDOM OF CHOICE" version.
Part number: XR302141 £3.99 Click for more details
Quantity
Suspension Arm Front Lower - C-Hub - Soft
Suspension Arm Front Lower for C-Hub Suspension Precision-molded front lower suspension arm for C-hub suspension. May be used on either left or right sides.
Part number: XR302150 £2.99 Click for more details
Quantity
Short Suspension Arm - Front Lower - C-Hub - Hard
Molded short front lower suspension arm for C-hub suspension. Hard rigidity. May be used on either left or right side. Engraved with "H" for easy identification
Part number: XR302160 £3.99 Click for more details
Quantity
T2 Front Suspension Arm - Hard - Rubber-Spec
Molded composite front lower suspension arm for XRAY T2. May be used on either left or right side.
Part number: XR302161 £3.99 Click for more details
Quantity
T2 Front Suspension Arm - Extra-Hard - Foam-Spec
Extra-hard molded composite front lower suspension arm. Recommended for use in high-grip conditions or with foam tires
Part number: XR302162 £3.99 Click for more details
Quantity
T2 008 Front Suspension Arm - Hard - Rubber-Spec - 1-Hole
Molded composite front lower suspension. Standard hard-composite mixture arms (labeled “H”) for rubber-tire racing.
Part number: XR302163 £3.99 Click for more details
Quantity
T2 008 Front Suspension Arm - Extra-Hard - Foam-Spec - 1-Hole
Molded composite front lower suspension. Extra-hard composite mixture arms (labeled “XH”) for high-traction foam-tire racing.
Part number: XR302164 £3.99 Click for more details
Quantity
Ackermann Extension Plate (2)
Set of CNC-machined graphite extension plates for mounting to steering blocks, providing a different Ackermann setup for improved steering for foam tire carpet racing. Includes all necessary mounting hardware
Part number: XR302205 £7.99 Click for more details
Quantity
Steering Block Right - Wide
Molded right steering block for pivotball suspension. For use with short front upper suspension arm.
Standard on T1 EVO2 "FREEDOM OF CHOICE" version.
Part number: XR302211 £3.99 Click for more details
Quantity
Steering Block Left - Wide
Molded left steering block for pivotball suspension. For use with short front upper suspension arm.
Standard on T1 EVO2 "FREEDOM OF CHOICE" version.
Part number: XR302221 £3.99 Click for more details
Quantity
Composite Steering Block Right 3 Holes
Right C-hub steering block made from tough molded composite. Includes 3 holes for choice of Ackermann setting.
Part number: XR302251 £3.99 Click for more details
Quantity
Adj. Turnbuckle L/R 40 mm
Set of two adjustable steering rod turnbuckles, manufactured from world-renowned top-secret "Hudy Spring Steel".
Part number: XR302610 £7.99 Click for more details
Quantity
Adj. Turnbuckle L/R 35 mm
Set of two adjustable turnbuckles, manufactured from world-renowned top-secret "Hudy Spring Steel". Used for front upper suspension links of C-hub suspension.
Part number: XR302611 £7.99 Click for more details
Quantity
Adj. Turnbuckle L/R 30 mm
Set of two adjustable turnbuckles, 30mm length. Manufactured from world-renowned top-secret "Hudy Spring Steel".
Part number: XR302615 £7.99 Click for more details
Quantity
Adj. Turnbuckle L/R 22 mm
Adjustable steering rod set for connecting the servo horn to the central servo saver. Includes two molded ball joints and a turnbuckle manufactured from world-renowned top-secret "Hudy Spring Steel".
Part number: XR302620 £4.99 Click for more details
Quantity
Adj. Turnbuckle L/R 20 mm
Set of two adjustable steering rod turnbuckle, manufactured from world-renowned top-secret "Hudy Spring Steel".
Part number: XR302630 £6.99 Click for more details
Quantity
Front Wishbone Long Pin Lower
Set of two front lower spring steel pivot pins; longer pins for use with front anti-roll bar set. Hardened for very high durability and long life.
Part number: XR307212 £3.99 Click for more details
Quantity
Front Wishbone Pivot Pin Lower
Front lower spring steel pivot pins. Hardened for very high durability and long life. Set of two
Part number: XR307214 £3.99 Click for more details
Quantity
Front Suspension Pivot Pin (2)
Front lower inner pivot pins for XRAY T2. Hardened for very high durability and long life. Set of two
Part number: XR307215 £3.99 Click for more details
Quantity
Front Pivot Pin for C-Hub (2)
Front lower (outer) spring steel pivot pins for C-hub suspension. Hardened for very high durability and long life. Set of two.
Part number: XR307220 £2.99 Click for more details
Quantity
Front Arm Pivot Pin (2)
Front lower outer pivot pins for XRAY T2. Hardened for very high durability and long life. Set of two.
Part number: XR307221 £2.99 Click for more details
Quantity
Front Wishbone Pivot Pin Upper
Front upper spring steel pivot pins. Hardened for very high durability and long life. Set of two.
Part number: XR307230 £3.99 Click for more details
Quantity
Pivot Ball 8.4mm
Front 8.5mm pivot balls, manufactured from "Hudy Spring Steel". Hardened and ultra-precisely hand ground for low weight, very high durability and long life. Set of two.
Part number: XR307250 £6.99 Click for more details
Quantity
Alu Pivot Ball 8.4mm
Front 8.4mm pivot balls, CNC-machined from strong, lightweight duraluminum and hardcoated for long life and durability. Set of four.
Part number: XR307251 £12.99 Click for more details
Quantity
Alu Adjusting Nuts M10x1
Alu M8 adjusting nut for capturing pivot balls in front steering blocks. Set of four.
Part number: XR307252 £6.99 Click for more details
Quantity
Plastic Ball Cup 8.4mm (4)
Molded cups for cushioning alu M8 adjusting nuts against front pivot balls.
Part number: XR307254 £2.99 Click for more details
Quantity
Alu Pivot Ball 6.8 mm - Hard
Rear lower 6.8mm pivot balls, CNC-machined from strong, lightweight duraluminum and hardcoated for long life and durability. Set of four.
Part number: XR307351 £12.99 Click for more details
Quantity
Alu Adjusting Nut M8x1 (4)
Alu M8 adjusting nut for capturing pivot balls in rear uprights. Set of four.
Part number: XR307352 £6.99 Click for more details
Quantity
Plastic Ball Cup 6.8mm (4)
Molded ball cup for cushioning alu M8 adjusting nuts against rear pivot balls.
Part number: XR307354 £2.99 Click for more details
Quantity
Plastic Ball Cup 6.8mm
Molded cups for cushioning alu M8 adjusting nuts against front and rear pivot balls. Set of four front and four rear cups.
Part number: XR307360 £3.99 Click for more details
Quantity
Pivot Ball 4.9 mm Double
Specially-machined 4.9mm pivot ball with double bevel shoulders. Set of 10 pieces.
Part number: XR307453 £7.99 Click for more details
Quantity
Pivot Ball 5.0 mm Double Bevel
Specially-machined 5.0mm pivot ball with double bevel shoulders, for use with open 5.0mm ball joints. Set of 10 pieces.
Part number: XR307454 £7.99 Click for more details
Quantity