Part Number
Show All Chassis
Composite Chassis
T1R composite chassis is compatible with the graphite version, they are fully interchangeable.
Part number: XR301117
£27.99
Click for more details
Quantity
1
2
3
4
5
T2R FRP Chassis - CNC Machined
CNC-machined FRP chassis for XRAY T2R with MFTT channels and attachment points. Can be upgraded with a T2 graphite chassis
Part number: XR301118
£62.86
Click for more details
Quantity
1
2
3
4
5
T2 Chassis 3.5mm Graphite
Ultra-rigid and stiff CNC-machined T2 chassis from premium grade, extra-thick and rigid 3.5mm graphite material
Part number: XR301123
£105.94
Click for more details
Quantity
1
2
3
4
5
T2 008 Chassis 2.5mm Graphite - 6-Cell - Rubber-Spec
CNC-machined 5-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Fits XRAY T2’008.
Part number: XR301125
£75.99
Click for more details
Quantity
1
2
3
4
5
T2 009 Chassis 2.5mm Graphite - 6-Cell - Rubber-Spec
CNC-machined 6-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Fits XRAY T2’009.
Part number: XR301128
£75.99
Click for more details
Quantity
1
2
3
4
5
T3 Graphite Chassis 2.5mm - 6-Cell - Rubber-Spec
CNC-machined 6-cell chassis of 2.5mm premium-grade graphite material, specially designed and optimized for rubber-tire racing. Features slots for 6-cell batteries.
Part number: XR301129
£77.99
Click for more details
Quantity
1
2
3
4
5
T3 Graphite Chassis 3.0mm - Foam-Spec
CNC-machined 6-cell chassis of 3.0mm thick, premium-grade graphite material, specially designed and optimized for foam-tire racing.
Part number: XR301130
£85.99
Click for more details
Quantity
1
2
3
4
5
T3 11 Graphite Chassis 2.5mm
CNC-machined chassis of premium-grade 2.5mm thick graphite material. Specifically designed for LiPo batteries, all electronics are located along the centerline to make this the best-balanced electric touring car.
Part number: XR301131
£77.99
Click for more details
Quantity
1
2
3
4
5
Alu Countersunk Shim (4)
Machined alu countersunk shims for use on XRAY Quick SaverT. Set of 4
Part number: XR301159
£3.99
Click for more details
Quantity
1
2
3
4
5
Alu Countersunk Shim - Orange (4)
Machined alu countersunk shims for use on XRAY Quick Saver
Part number: XR301159-O
£3.99
Click for more details
Quantity
1
2
3
4
5
Upper Deck - Wide
Wide upper deck is made of high-quality CNC-machined graphite. Wider and stiffer than stock upper decks on T1 Evo2 and T1 Factory Kit
Part number: XR301163
£31.43
Click for more details
Quantity
1
2
3
4
5
Upper Deck T1FK 05 - CNC
High-quality CNC-machined graphite upper deck for XRAY T1FK?05 has been optimized to provide sufficient flex while being stiff enough to provide rigidity. Includes composite bearing holder.
Part number: XR301164
£30.26
Click for more details
Quantity
1
2
3
4
5
Upper Deck T1FK 05 - CNC
High-quality CNC-machined graphite upper deck for XRAY T1FK?05 is wider than standard #301164 upper deck for increased chassis stiffness; recommended for high-grip conditions especially foam/carpet racing
Part number: XR301165
£31.43
Click for more details
Quantity
1
2
3
4
5
Composite Upper Deck
Molded upper deck for T1R.
Part number: XR301167
£8.14
Click for more details
Quantity
1
2
3
4
5
T2R FRP Upper Deck
CNC-machined FRP upper deck for XRAY T2R with MFTT channels and attachment points. Can be upgraded with a T2 graphite upper deck
Part number: XR301168
£26.77
Click for more details
Quantity
1
2
3
4
5
Ultra Flexible Top Deck
This option part makes the top deck and whole car very stiff in the axis direction of transmission and stiff at any serious crash, but makes the chassis with suspension flex when needed.
Part number: XR301170
£38.41
Click for more details
Quantity
1
2
3
4
5
Adjustable Upper Deck T1FK 05
The upper deck is strategically milled at the front to provide the required flexibility and torsion which makes the top deck great for low grip conditions. As grip increases, you can stiffen the upper deck by installing aluminum braces.
Part number: XR301175
£59.36
Click for more details
Quantity
1
2
3
4
5
Alu Upper Deck Brace (2)
CNC-machined lightweight alu braces for altering the stiffness of the upper decks of both the XRAY T2 (uses 2 braces) and T1FK'05 (uses 3 braces).
Part number: XR301176
£10.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Adj. Upper Deck 2.5mm Graphite
CNC-machined graphite upper deck for XRAY T2. Strategically machined MFT? (Multi-Flex Technology?) milled slots allow for precision adjustment of upper deck torsion and flex.
Part number: XR301177
£39.58
Click for more details
Quantity
1
2
3
4
5
T2 007 Upper Deck - Wide
CNC-machined graphite top deck is specially designed for high-grip foam-tire racing conditions
Part number: XR301179
£39.58
Click for more details
Quantity
1
2
3
4
5
T2 008 Rubber-Spec Upper Deck Graphite
CNC-machined upper deck of premium-grade graphite material, specially designed and optimized for rubber-tire racing conditions.
Part number: XR301183
£26.99
Click for more details
Quantity
1
2
3
4
5
T2 008 Asphalt-Spec Upper Deck Graphite + Rear Upper Deck - Set
CNC-machined front and rear upper deck of premium-grade graphite material, specially designed and optimized for rubber-tire racing conditions.
Part number: XR301185
£27.99
Click for more details
Quantity
1
2
3
4
5
T2 008/T2 009 Rubber-Spec Graphite Pads For Lipo - Set
The LiPo Conversion Set allows for the fitment of popular LiPo battery packs
Part number: XR301186
£26.99
Click for more details
Quantity
1
2
3
4
5
Flexible Top Deck 1/12
CNC-machined top-quality graphite top desk for T1M Mini. Provides medium stiffness
Part number: XR301189
£26.77
Click for more details
Quantity
1
2
3
4
5
In Stock
T3 Graphite Upper Deck 2.0mm - Rubber-Spec
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for rubber-tire racing conditions.
Part number: XR301190
£31.99
Click for more details
Quantity
1
2
3
4
5
T3 Graphite Upper Deck 2.0mm - Foam-Spec
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed and optimized for foam-tire racing conditions.
Part number: XR301191
£34.99
Click for more details
Quantity
1
2
3
4
5
T3 11 Graphite Upper Deck 2.0mm
CNC-machined upper deck of premium-grade 2.0mm thick graphite material, specially designed to fit the new LiPo chassis design and the new dual steering system.
Part number: XR301192
£31.99
Click for more details
Quantity
1
2
3
4
5
Composite Bumper
Small nylon lower bumper.
Part number: XR301200
£4.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Impact Absorbing Front Bumper
Impact Absorbing Front Bumper for T1. The bumper is made from high quality nylon that absorbs the energy from crashes.
Part number: XR301201
£4.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Composite Bumper
Lower bumper holder made from tough composite material. Fits XRAY T2
Part number: XR301202
£5.99
Click for more details
Quantity
1
2
3
4
5
Impact Absorbing Front
Impact -absorbing front bumper for XRAY T2 is made from high-quality nylon that absorbs the energy from crashes
Part number: XR301203
£6.99
Click for more details
Quantity
1
2
3
4
5
Upper Holder For Bumper - 2.5mm Graphite
CNC-machined front upper bumper holder for T2 made from highest-quality 2.5mm woven graphite
Part number: XR301213
£13.99
Click for more details
Quantity
1
2
3
4
5
Composite Upper Holder
Molded upper bumper holder features removable middle section for front transponder mounting. Feature molded brackets for Front Anti-Roll Bar Set (302460).
Part number: XR301217
£4.99
Click for more details
Quantity
1
2
3
4
5
Composite Upper Holder for Bumper
Upper bumper holder made from tough composite material. Fits XRAY T2.
Part number: XR301218
£4.99
Click for more details
Quantity
1
2
3
4
5
Foam Bumper
High quality foam bumper, hand-cut from specially developed foam material. Very light yet very strong. Protects front of car in serious collisions.
Part number: XR301220
£4.99
Click for more details
Quantity
1
2
3
4
5
Foam Bumper
High-resilience lightweight foam front bumper. Fits XRAY T2
Part number: XR301222
£6.99
Click for more details
Quantity
1
2
3
4
5
Foam Bumper - Hard
T2 Foam Bumper - Hard
Part number: XR301223
£9.99
Click for more details
Quantity
1
2
3
4
5
1/12 Foam Bumper
High-density front foam bumper fits 1:12th scale T1 Mini electric touring car.
Part number: XR301229
£4.99
Click for more details
Quantity
1
2
3
4
5
Front Body Mount Set
Front body mounts, complete set.
Part number: XR301320
£5.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Front Body Mount Set 6mm
Front body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2
Part number: XR301322
£5.99
Click for more details
Quantity
1
2
3
4
5
Front Body Mount Set +1mm Height
XRAY presents +1mm height-adjustable body posts for the T2 and NT1.
Part number: XR301323
£5.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Front Body Mount Set +2mm Height
XRAY presents +2mm height-adjustable body posts for the T2 and NT1
Part number: XR301324
£5.99
Click for more details
Quantity
1
2
3
4
5
Rear Body Mount Set
Rear body mounts, complete set.
Part number: XR301330
£5.99
Click for more details
Quantity
1
2
3
4
5
Rear body Mount Set 6mm
Rear body mount set includes redesigned 6mm-thick bodyposts and all other mounting hardware. Fits XRAY T2
Part number: XR301332
£5.99
Click for more details
Quantity
1
2
3
4
5
Rear Body Mount Set +1mm Height
XRAY presents +1mm height-adjustable body posts for the T2 and NT1
Part number: XR301333
£5.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Rear Body Mount Set +2mm Height
XRAY presents +2mm height-adjustable body posts for the T2 and NT1
Part number: XR301334
£5.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Upper Clamp for Bulkheads - Orange
Ultra-light, ultra-strong upper clamp for bulkheads, CNC-machined from premium Swiss 7075 T6 aluminum.
Part number: XR302024-O
£9.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Front Lower Suspension Adjustment Bulkhead - Orange
CNC-machined front lower suspension bulkhead made from premium Swiss 7075 T6 aluminum. Identical left and right sides. Orange color. Fits XRAY T3.
Part number: XR302027-O
£20.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Upper Clamp with Adj. Roll-Center RR-FL - Orange
Ultra-light, ultra-strong upper clamp for bulkheads with adjustment roll-center positions, CNC-machined from premium Swiss 7075 T6 aluminum, orange color.
Part number: XR302028-O
£34.99
Click for more details
Quantity
1
2
3
4
5
Alu Nut for Suspension Holder - Black
CNC-machined alu nut holds lower molded suspension holders. Black color. Set of 2, fits XRAY T2, T3 cars.
Part number: XR302033-K
£5.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Alu Lower Suspension 1-Piece Holder
The optional 1-piece aluminum suspension holder is a direct replacement for the standard rearward holders of the FRONT suspension.
Part number: XR302047-O
£20.99
Click for more details
Quantity
1
2
3
4
5
Alu Lower Rear Suspension 1-Piece Holder - Orange
Optional 1-piece aluminum rear suspension holder is a direct replacement for the standard forward holders of the REAR suspension.
Part number: XR302048-O
£20.99
Click for more details
Quantity
1
2
3
4
5
T2 008 Alu Chassis Brace
Alu chassis brace for T2'008 is CNC-machined from high-grade aluminum
Part number: XR302054
£13.99
Click for more details
Quantity
1
2
3
4
5
Alu Chassis Brace - Black
Alu chassis brace is CNC-machined from high-grade aluminum. It is recommended for carpet tracks with medium to super-high traction. Black color.
Part number: XR302054-K
£13.99
Click for more details
Quantity
1
2
3
4
5
T3 Composite Layshaft Bearing Support Shim (2)
Composite middle shaft bearing holders allow the top deck mount to be mounted independently from the central bulkheads.
Part number: XR302069
£4.99
Click for more details
Quantity
1
2
3
4
5
T2 008 Alu Rear Lower Susp. Adjust. Bulkhead
CNC-machined rear lower suspension bulkhead made from premium Swiss 7075 T6 aluminum. Identical left and right sides. Fits XRAY T2’008.
Part number: XR303012
£19.99
Click for more details
Quantity
1
2
3
4
5
T2 008 Right Alu Layshaft Bulkhead
CNC-machined right-side layshaft bulkhead made from premium Swiss 7075 T6 aluminum. Fits XRAY T2’008.
Part number: XR303013
£12.99
Click for more details
Quantity
1
2
3
4
5
T2 009 Right Alu Layshaft Bulkhead - Orange
CNC-machined right-side layshaft bulkhead made from premium Swiss 7075 T6 aluminum. Orange colour. Fits XRAY T2’009.
Part number: XR303013-O
£12.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Layshaft Bulkhead Right - Orange
CNC-machined right-side layshaft bulkhead made from premium Swiss 7075 T6 aluminum. Layshaft bulkhead is independently mounted from the top deck for better flex adjustment. Orange color. Fits XRAY T3.
Part number: XR303014-O
£12.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Rear Lower Suspension Adjustable Bulkhead - Orange
Ultra-light, ultra-strong rear lower bulkhead, CNC-machined from premium Swiss T6 7075 aluminum. Orange color. Fits XRAY T3.
Part number: XR303022-O
£20.99
Click for more details
Quantity
1
2
3
4
5
T2 007 Motor Mount Bulkhead
CNC-machined motor mount bulkhead made from premium Swiss T6 7075 aluminum. Fits XRAY T2'007
Part number: XR303029
£19.99
Click for more details
Quantity
1
2
3
4
5
Alu Quick Roll-Center Holder
QRC (Quick Roll Center?) holders pre-assembled with #302664 unidirectional ball joints
Part number: XR303032
£8.99
Click for more details
Quantity
1
2
3
4
5
In Stock
T2 Alu Quick Roll-Center Holder 4.9mm - Orange (2+2)
QRC (Quick Roll Center™) holders pre-assembled with #302664 unidirectional ball joints.
Part number: XR303032-O
£8.99
Click for more details
Quantity
1
2
3
4
5
Rear Upper Deck 2.5m Graphite
CNC-machined 2.5mm graphite rear upper deck fits XRAY T2.
Part number: XR303042
£16.28
Click for more details
Quantity
1
2
3
4
5
T2 007 Rear Upper Deck 2.5mm
CNC-machined rear upper deck made from premium grade 2.5mm graphite material
Part number: XR303044
£13.99
Click for more details
Quantity
1
2
3
4
5
T2 008 Rubber-Spec Rear Upper Deck Graphite
CNC-machined rear upper deck made from premium graphite material to guarantee maximum strength and long life.
Part number: XR303046
£7.99
Click for more details
Quantity
1
2
3
4
5
T2 008 Foam-Spec Rear Upper Deck Graphite
CNC-machined rear upper deck made from premium graphite material to guarantee maximum strength and long life.
Part number: XR303047
£11.99
Click for more details
Quantity
1
2
3
4
5
Central Motor Mount
Swiss 7075 T6 alum CNC-machined motor mount for XRAY T1FK?05, keys to lower chassis and upper deck for increased chassis rigidity.
Part number: XR303050
£29.10
Click for more details
Quantity
1
2
3
4
5
In Stock
T2 008 Motor Mount Bulkhead
CNC-machined motor-mount bulkhead made from premium Swiss 7075 T6 aluminum. Fits XRAY T2’008.
Part number: XR303051
£25.99
Click for more details
Quantity
1
2
3
4
5
T2 008 Motor Mount Bulkhead - Orange
CNC-machined motor-mount bulkhead made from premium Swiss 7075 T6 aluminum. Orange colour. Fits XRAY T2’009.
Part number: XR303051-O
£25.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Motor Mount Bulkhead - Orange
CNC-machined motor-mount bulkhead made from premium Swiss 7075 T6 aluminum. Motor mount bulkhead has been purpose-designed to accommodate either brushed or brushless motors, placing the motor 3mm more towards the centerline.
Part number: XR303052-O
£33.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Motor Bulkhead Holder - Black
Alu motor holder connects the motor mount bulkhead to the center of the chassis, this transfers the flex effect of the motor mount into the absolute centerline of the chassis.
Part number: XR303059-K
£8.99
Click for more details
Quantity
1
2
3
4
5
Graphite Motor Guard
CNC-machined graphite motor guard for T1FK?05 protects the motor endbell from collisions. Includes mounting hardware
Part number: XR303060
£16.99
Click for more details
Quantity
1
2
3
4
5
LiPo Chassis Graphite Motor Guard
CNC-machined graphite motor guard for LiPo chassis protects the motor endbell from collisions. Includes mounting hardware.
Part number: XR303061
£16.99
Click for more details
Quantity
1
2
3
4
5
Composite Hub for Battery
Replacement composite hub for graphite battery holder. Set of two.
Part number: XR306120
£3.99
Click for more details
Quantity
1
2
3
4
5
Set of Battery Backstops
Set of six molded composite battery backstops for XRAY T1FK?05 and T2.
Part number: XR306131
£7.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Battery Holder Mount
Alu mount with ball end for attachment to battery mount strap. Set of two.
Part number: XR306140
£8.99
Click for more details
Quantity
1
2
3
4
5
In Stock
6-Cell Graphite Battery Strap
Pre-assembled graphite battery strap for XRAY T2 features the XRAY smart battery holder system and new battery tweak-free mounting system. The alu capture wheel enables you to easily close and secure the battery strap without any clips
Part number: XR306163
£31.99
Click for more details
Quantity
1
2
3
4
5
Graphite Battery Strap for LiPo/NiMH - Black - Set
Pre-assembled Graphite Battery Strap for LiPo/NiMH - Black - Set features the XRAY smart battery holder system and new battery tweak-free mounting system.
Part number: XR306163-K
£31.99
Click for more details
Quantity
1
2
3
4
5
T2 008 5-Cell Graphite Battery Strap (Set)
Pre-assembled 5-cell graphite battery strap for XRAY T2’008 features the XRAY smart battery holder system and new battery tweak-free mounting system.
Part number: XR306164
£31.99
Click for more details
Quantity
1
2
3
4
5
Stickpack Holder 1/12
CNC-machined graphite stickpack holder set allows the use of 4-cell stickpacks in the XRAY T1 Mini
Part number: XR306179
£31.43
Click for more details
Quantity
1
2
3
4
5
Composite LiPo Battery Backstops
Set of molded composite LiPo battery backstops to prevent LiPo battery movement on chassis.
Part number: XR306182
£7.99
Click for more details
Quantity
1
2
3
4
5
Long Composite Battery Backstop (1+1)
Set of molded long composite LiPo battery backstops to prevent LiPo battery movement on chassis.
Part number: XR306184
£7.99
Click for more details
Quantity
1
2
3
4
5
Alu LiPo Battery Backstop (F+R)
Set of alu LiPo battery backstops (F+R) to prevent LiPo battery movement on chassis.
Part number: XR306186
£19.99
Click for more details
Quantity
1
2
3
4
5
Alu Servo Mount (2Pcs)
Alu mounts, CNC-machined, for mounting steering servo. Set of two.
Part number: XR306200
£8.99
Click for more details
Quantity
1
2
3
4
5
Alu Servo Mount - Black (2Pcs)
Alu mounts, CNC-machined, for mounting steering servo.
Part number: XR306200-K
£8.99
Click for more details
Quantity
1
2
3
4
5
Composite Servo Mount (2Pcs)
Molded servo mounts. Set of two.
Part number: XR306210
£3.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Composite Set Of Servo Shims (4Pcs)
Set of composite shims for mounting servos to mounting posts. Includes: 3x6x1mm (qty 4), 3x6x2mm (qty 4), 3x6x3mm (qty 4).
Part number: XR306219
£3.99
Click for more details
Quantity
1
2
3
4
5
Antenna Mount
Molded antenna mount.
Part number: XR306300
£2.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Composite Antenna Mount - Thin
Molded thin antenna mount.
Part number: XR306301
£2.99
Click for more details
Quantity
1
2
3
4
5
Antenna (2)
Antenna tube to fit antenna mount. Set of two.
Part number: XR306310
£2.99
Click for more details
Quantity
1
2
3
4
5
Composite Transporder Mount
Molded transpoder mount, can be mounted on left or right side of 301117 composite chassis
Part number: XR306400
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Top Deck Mount
Molded support for 301167 composite upper deck. Connects upper deck to chassis for extra rigidity.
Part number: XR306500
£3.99
Click for more details
Quantity
1
2
3
4
5
Alu Top Deck Mount (2)
CNC-machined alu top deck mounting posts for XRAY T1FK?05. Set of two. Recommended for use with #301165 Wide Top Deck in the rear.
Part number: XR306510
£10.46
Click for more details
Quantity
1
2
3
4
5
In Stock
Alu Top Deck Mount Rear (2pcs)
CNC-machined alu top deck rear mounting posts for XRAY T2. Set of two
Part number: XR306511
£8.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Alu Top Deck Mount Front (2)
CNC-machined alu top deck front mounting posts for XRAY T2. Set of two.
Part number: XR306512
£8.99
Click for more details
Quantity
1
2
3
4
5
T2 007 Alu Low Top Deck Mount
CNC-machined alu stands for connecting T2'007 top deck and chassis, increases torsional stiffness. Not for use on T2. Set of 2
Part number: XR306513
£8.99
Click for more details
Quantity
1
2
3
4
5
T2 009 Alu Low Top Deck Mount - Black (2)
CNC-machined alu stands for connecting T2’009 top deck and chassis, increases torsional stiffness.
Part number: XR306513-K
£8.99
Click for more details
Quantity
1
2
3
4
5
T2 009 Alu Low Top Deck Mount - Orange (2)
CNC-machined alu stands for connecting T2’009 top deck and chassis, increases torsional stiffness.
Part number: XR306513-O
£8.99
Click for more details
Quantity
1
2
3
4
5
Composite Low Top Deck Mount
Lightweight molded composite stand for connecting top deck and chassis, increases torsional stiffness.
Part number: XR306514
£3.99
Click for more details
Quantity
1
2
3
4
5
T3 Alu Low Top Deck Mount - Black (2)
CNC-machined alu stands for connecting top deck and chassis, increases torsional stiffness. Black color.
Part number: XR306515-K
£8.99
Click for more details
Quantity
1
2
3
4
5
Precision Balancing Chassis Weights (4 Pcs.)
A complete set of 4 chassis balancing weights (2x 5g + 2x 10g) and mounting hardware.
Part number: XR309840
£17.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Precision Balancing Chassis
Precision chassis weights
A complete set of 3 chassis balancing weights and mounting hardware. Designed for XRAY T1 to be mount at the pre-drilled holes at the center of the chassis but fits any other race car as well. Made from brass.
Part number: XR309850
£18.99
Click for more details
Quantity
1
2
3
4
5
Precision Balancing Chassis Weights Center 20g
Precision-machined brass chassis balancing weights. Designed for XRAY T3 LiPo chassis for mounting at pre-drilled chassis holes in the center of the car.
Part number: XR309853
£13.99
Click for more details
Quantity
1
2
3
4
5
Lipo Balancing Chassis Weights
Excellent and unique chassis weights for use with LiPo battery pack.
Part number: XR309860
£34.99
Click for more details
Quantity
1
2
3
4
5
Chassis 3mm - CNC Machined - Swiss 7075 T6
CNC-machined 3mm Swiss 7075 T6 alu chassis plate for NT1. Beveled lower outer edges, countersunk screw holes on bottom surface
Part number: XR331100
£68.99
Click for more details
Quantity
1
2
3
4
5
Chassis 4mm - CNC Machined - Swiss 7075 T6
XRAY is very proud to announce this new CNC-machined 4mm Swiss 7075 T6 alu chassis plate for NT1
Part number: XR331101
£85.99
Click for more details
Quantity
1
2
3
4
5
Alu Chassis with Weight Integr. CNC - Swiss 7075 T6 (3mm)
CNC-machined 3mm Swiss 7075 T6 alu chassis plate for NT1. Beveled lower outer edges, countersunk screw holes on bottom surface.
Part number: XR331102
£68.99
Click for more details
Quantity
1
2
3
4
5
Brass Chassis Weight Front 25g
Precision-machined brass chassis balancing weight. Designed for XRAY NT1 chassis with front weight integration hole.
Part number: XR331180
£25.99
Click for more details
Quantity
1
2
3
4
5
Brass Chassis Weight Rear 25g
Precision-machined brass chassis balancing weight. Designed for XRAY NT1 chassis with rear weight integration hole.
Part number: XR331181
£25.99
Click for more details
Quantity
1
2
3
4
5
Graphite Chassis Insert Front
CNC-machined graphite FRONT insert for NT1 chassis.
Part number: XR331190
£17.99
Click for more details
Quantity
1
2
3
4
5
Graphite Chassis Insert Rear
CNC-machined graphite REAR insert for NT1 chassis.
Part number: XR331191
£17.99
Click for more details
Quantity
1
2
3
4
5
Composite Bumper
Lower bumper made from tough composite material
Part number: XR331200
£5.99
Click for more details
Quantity
1
2
3
4
5
Composite Wide Bumper
Wide lower bumper holder made from high-quality composite material to better absorb energy from crashes
Part number: XR331201
£7.99
Click for more details
Quantity
1
2
3
4
5
Composite Upper Holder for Bumper
Upper bumper holder made from tough composite material
Part number: XR331210
£5.99
Click for more details
Quantity
1
2
3
4
5
Composite Front Holder for Personal Transponder
Personal transponder holder made from tough composite material
Part number: XR331211
£3.99
Click for more details
Quantity
1
2
3
4
5
Graphite Upper Holder for Bumper
Upper bumper holder made from thick, CNC-machined top-grade graphite
Part number: XR331215
£16.99
Click for more details
Quantity
1
2
3
4
5
Foam Bumper
High-density front bumper cut from specially-developed closed-cell foam material. Very light yet very strong. Protects front of car in serious collisions
Part number: XR331220
£7.99
Click for more details
Quantity
1
2
3
4
5
Foam Bumper - Hard
Front bumper made from extra-stiff yet lightweight closed-cell foam. Will protect the car better and will not yield even in heavy collisions
Part number: XR331221
£9.99
Click for more details
Quantity
1
2
3
4
5
Composite Chassis Weight Holder
Molded composite holder for integrated chassis weights or chassis inserts.
Part number: XR331280
£5.99
Click for more details
Quantity
1
2
3
4
5
Composite Rear Body Back Stop (2)
Composite body back stop set for 1/10 touring cars (electric or nitro)
Part number: XR331340
£5.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower & Upper Bulkhead Front Right
Molded composite lower and upper front right bulkhead set
Part number: XR332010
£7.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower & Upper Bulkhead Front Left
Molded composite lower and upper front left bulkhead set
Part number: XR332020
£7.99
Click for more details
Quantity
1
2
3
4
5
Composite Adjust. Ball-Bearing Hub (4)
Molded composite adjustable ball-bearing hub. Set of 4
Part number: XR332070
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower & Upper Bulkhead Rear Right
Molded composite lower and upper rear right bulkhead set
Part number: XR333010
£7.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower & Upper Bulkhead Rear Left
Molded composite lower and upper rear left bulkhead set
Part number: XR333020
£7.99
Click for more details
Quantity
1
2
3
4
5
Composite Rear Bulkhead Cover
Molded composite rear bulkhead cover
Part number: XR333050
£5.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Alu Rear Bulkhead Cover
Alu rear bulkhead cover. Ultra-strong construction for increased lifespan and durability.
Part number: XR333051
£29.99
Click for more details
Quantity
1
2
3
4
5
Graphite Roll-Center Bridge
CNC-machined rear roll center bridge made from thick, top-grade graphite
Part number: XR333060
£9.99
Click for more details
Quantity
1
2
3
4
5
Graphite Roll-Center Bridge 3.0mm
CNC-machined rear roll center bridge made from extra-thick 3.0mm top-grade graphite.
Part number: XR333061
£9.99
Click for more details
Quantity
1
2
3
4
5
Composite Receiver Case
Molded composite receiver case (top & bottom) and switch cover. Case top includes integrated antenna holder
Part number: XR336000
£10.99
Click for more details
Quantity
1
2
3
4
5
Rubber Receiver Case Cover
Molded rubber receiver case crystal cover
Part number: XR336030
£3.99
Click for more details
Quantity
1
2
3
4
5
Graphite Receiver Bracket Set
Smart, stylish and functional, this optional receiver bracket is a direct replacement for the molded composite receiver case
Part number: XR336040
£12.99
Click for more details
Quantity
1
2
3
4
5
Receiver Switch Set NT1
Complete receiver switch set for NT1 fits directly into composite receiver case. Pre wired mechanical on/off switch for quick & easy powering/shutdown of onboard electronics.
Part number: XR336060
£7.99
Click for more details
Quantity
1
2
3
4
5
Graphite Personal Transponder Bracket
Smart and functional personal transponder mounting plate made from premium-quality graphite material. Includes mounting hardware for easy attachment to NT1 radio plate
Part number: XR336080
£6.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Graphite Radio Plate
CNC-machined radio plate for NT1 is made from top-quality graphite material. Strategically-placed cutouts allow quick & easy adjustment of linkages
Part number: XR336110
£42.99
Click for more details
Quantity
1
2
3
4
5
Graphite Battery Plate
Optional CNC-machined plate has recessed slots for 5-cell receiver pack
Part number: XR336155
£16.99
Click for more details
Quantity
1
2
3
4
5
Brass Battery Plate For Lipo Batteries
The exclusive LiPo tray was designed to accommodate the lower weight of the LiPo receiver battery pack compared to standard NiMH receiver battery packs.
Part number: XR336156
£42.99
Click for more details
Quantity
1
2
3
4
5
Brass Chassis Weight for NT1 30g
High-quality, CNC-machined brass chassis weight for NT1 fits in the lowest part of the chassis centerline to get the best possible balance of the car.
Part number: XR336170
£19.99
Click for more details
Quantity
1
2
3
4
5
Composite Rear Stiffener
Molded composite rear stiffener brace
Part number: XR336180
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Roll-Over Bar
Molded composite roll-over bar acts as convenient carrying handle
Part number: XR336190
£3.99
Click for more details
Quantity
1
2
3
4
5
Alu Radio Plate Mounts (L&R) - Swiss 7075 T6
Aluminum radio plate mounts allow more solid radio plate mounting, and reduce the chance of stripped threads.
Part number: XR336231
£26.99
Click for more details
Quantity
1
2
3
4
5
Composite Battery Mount (L+R)
Molded composite battery plate mounts. Set of 2 matched pieces (left & right).
Part number: XR336250
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Antenna Mount
Molded antenna mount (from #336040 Graphite Receiver Bracket Set) made from tough composite material.
Part number: XR336300
£2.99
Click for more details
Quantity
1
2
3
4
5
Alu Chassis CNC Machined - Swiss 7075 T6 (5mm)
Lightweight chassis CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, strategically machined in low-stress areas to make it as light as possible without affecting strength or rigidity.
Part number: XR341100
£108.99
Click for more details
Quantity
1
2
3
4
5
Graphite Chassis Insert Front
CNC-machined graphite front inserts for RX8 chassis.
Part number: XR341180
£15.99
Click for more details
Quantity
1
2
3
4
5
Graphite Chassis Insert Rear
CNC-machined graphite rear inserts for RX8 chassis.
Part number: XR341181
£13.99
Click for more details
Quantity
1
2
3
4
5
Brass Chassis Weight Front 60g
Precision-machined brass chassis balancing weight.
Part number: XR341182
£30.99
Click for more details
Quantity
1
2
3
4
5
Brass Chassis Weight Rear 20g
Precision-machined brass chassis balancing weight.
Part number: XR341183
£19.99
Click for more details
Quantity
1
2
3
4
5
Brass Chassis Weight Front 20g
Precision-machined brass chassis balancing weight.
Part number: XR341184
£15.99
Click for more details
Quantity
1
2
3
4
5
Brass Chassis Weight Rear 40g
Precision-machined brass chassis balancing weights.
Part number: XR341185
£27.99
Click for more details
Quantity
1
2
3
4
5
Composite Bumper
Impact-absorbing lower front bumper made from high-quality and special composite material to withstand hard impacts.
Part number: XR341200
£13.99
Click for more details
Quantity
1
2
3
4
5
Composite Upper Holder for Front Body Posts
Upper bumper holder made from tough special composite material to withstand hard impacts.
Part number: XR341210
£7.99
Click for more details
Quantity
1
2
3
4
5
Graphite Holder for Front Body Posts - Set
Tough, strong and light graphite holder for RX8 front body posts made from thick, CNC-machined, top-grade graphite.
Part number: XR341215
£19.99
Click for more details
Quantity
1
2
3
4
5
Composite Front Body Post (2)
Heavy-duty body post made from molded composite material.
Part number: XR341320
£4.99
Click for more details
Quantity
1
2
3
4
5
Alu Front Body Post (2)
Alu front body posts for XRAY RX8 are CNC-machined from premium lightweight Swiss 7075 T6 aluminum.
Part number: XR341321
£19.99
Click for more details
Quantity
1
2
3
4
5
Composite Rear Body Holder
Heavy-duty rear body post made from molded composite material.
Part number: XR341330
£9.99
Click for more details
Quantity
1
2
3
4
5
Composite Rear Body Holder Screw (2)
Molded composite rear body holder screw.
Part number: XR341360
£4.99
Click for more details
Quantity
1
2
3
4
5
Composite Rear Body Centering Plate
Molded composite rear body centering plate.
Part number: XR341380
£4.99
Click for more details
Quantity
1
2
3
4
5
Graphite Rear Body Centering Plate - Set
Graphite rear body centering plate set.
Part number: XR341381
£17.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower Bulkhead Front Right
Molded composite front lower right suspension bulkhead.
Part number: XR342010
£13.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower Bulkhead Front Left
Molded composite front lower left suspension bulkhead.
Part number: XR342020
£13.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower Bulkhead Rear Right
Molded composite lower rear right bulkhead.
Part number: XR343010
£13.99
Click for more details
Quantity
1
2
3
4
5
Composite Lower Bulkhead Rear Left
Molded composite lower rear left bulkhead.
Part number: XR343020
£13.99
Click for more details
Quantity
1
2
3
4
5
Graphite Rear Brace
CNC-machined rear brace made from 2.5mm premium-grade graphite material.
Part number: XR343030
£6.99
Click for more details
Quantity
1
2
3
4
5
Composite Rear Bulkhead Cover
Molded composite rear bulkhead cover.
Part number: XR343050
£5.99
Click for more details
Quantity
1
2
3
4
5
Graphite Radio Plate
Radio plate CNC-machined from top-quality graphite material.
Part number: XR346110
£59.99
Click for more details
Quantity
1
2
3
4
5
COMPOSITE BATTERY PLATE
Part number: XR346150
£4.99
Click for more details
Quantity
1
2
3
4
5
BRASS BATTERY PLATE FOR LIPO BATTERIES - 40g
Part number: XR346156
£39.99
Click for more details
Quantity
1
2
3
4
5
BRASS BATTERY PLATE FOR LIPO BATTERIES - 100g
Part number: XR346157
£42.99
Click for more details
Quantity
1
2
3
4
5
Alu Radio Plate Tweak Bushing Hard Coated (2)
High-strength radio plate bushing CNC-machined from premium Swiss 7075 T6 alu.
Part number: XR346181
£7.99
Click for more details
Quantity
1
2
3
4
5
Alu Radio Plate Bushing - Fixed (2)
High-strength radio plate bushing CNC-machined from premium Swiss 7075 T6 alu.
Part number: XR346182
£6.99
Click for more details
Quantity
1
2
3
4
5
Roll-Over Bar
Roll-over bar made from spring steel.
Part number: XR346190
£9.99
Click for more details
Quantity
1
2
3
4
5
Composite Radio Plate Mounts (L+R)
Molded composite radio plate mounts. Set of 2 matched pieces (L+R).
Part number: XR346230
£5.99
Click for more details
Quantity
1
2
3
4
5
Alu Radio Plate Mounts (L+R) - Swiss 7075 T6
Alu radio plate mounts allow more solid radio plate mounting while reducing the chance of stripped threads.
Part number: XR346231
£34.99
Click for more details
Quantity
1
2
3
4
5
Front Lower Inner Pivot Pin (2)
Front lower inner pivot pins. Hardened for ultra-high durability and long life.
Part number: XR347210
£6.99
Click for more details
Quantity
1
2
3
4
5
Rear Upper Inner Pivot Pin (2)
Rear upper inner pivot pins. Hardened for ultra-high durability and long life.
Part number: XR347320
£5.99
Click for more details
Quantity
1
2
3
4
5
REAR BODY HOLDER ARM PIN (2)
Part number: XR347330
£4.99
Click for more details
Quantity
1
2
3
4
5
Alu Rear Body Holder Arm Pin - Hard Coated (2)
Alu hardcoated rear body holder arm pins are CNC-machined from premium lightweight Swiss 7075 T6 aluminum and has been strategically lightened by 63% compared to the standard #347330 arm pin.
Part number: XR347331
£7.99
Click for more details
Quantity
1
2
3
4
5
XRAY XB808 - 2010 SPECS CONVERSION SET
Part number: XR350902
£114.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Alu Chassis - Hardcoated Swiss 7075 T6 (3mm) - V2
Newly redesigned (version 2) chassis for XB8EC with improved weight distribution.
Part number: XR351101
£77.99
Click for more details
Quantity
1
2
3
4
5
XB808 Alu Chassis - Hardcoated Swiss 7075 T6 (3mm)
The chassis is CNC-machined from high-quality Swiss 3mm 7075 T6 aluminum, and is strategically machined in low-stress areas to make it as light as possible without affecting strength or rigidity.
Part number: XR351102
£72.99
Click for more details
Quantity
1
2
3
4
5
XB808 Alu Chassis Long (3mm) - Swiss 7075 T6 - Hard Coated
CNC-machined long chassis for XB808 made from high-quality Swiss 3mm 7075 T6 aluminum, strategically machined in low-stress areas to make it as light as possible without affecting strength or rigidity.
Part number: XR351103
£77.99
Click for more details
Quantity
1
2
3
4
5
XB808 11 Alu Chassis CNC Machined (3mm)
CNC-machined chassis for XB808’11 made from high-quality Swiss 3mm 7075 T6 aluminum, strategically machined in low-stress areas to make it as light as possible without affecting strength or rigidity.
Part number: XR351104
£82.99
Click for more details
Quantity
1
2
3
4
5
XB808E Alu Chassis - Swiss 7075 T6 3mm – Hardcoated
The chassis is CNC-machined from high-quality Swiss 3mm 7075 T6 aluminum, and is strategically machined in low-stress areas to make it as light as possible without affecting strength or rigidity.
Part number: XR351105
£77.99
Click for more details
Quantity
1
2
3
4
5
XT8 Alu Chassis - Hardcoated Swiss 7075 T6 (3mm)
The XT8 chassis is CNC-machined from high-quality Swiss 3mm 7075 T6 hardcoated aluminum
Part number: XR351120
£87.99
Click for more details
Quantity
1
2
3
4
5
XT8 Alu Chassis - Long - Hardcoated Swiss 7075 T6 (3mm)
Longer XT8 chassis is 13mm longer than the standard #351120 chassis, thus moving the weight of the car more forward for better balance.
Part number: XR351121
£87.99
Click for more details
Quantity
1
2
3
4
5
Chassis Side Guards L+R XB8
Composite side guards. Uses 4 mounting points instead of typical 3 of other brands. Set of two (left / right)
Part number: XR351150
£11.99
Click for more details
Quantity
1
2
3
4
5
In Stock
XB808 Chassis Side Guards L+R
Chassis side guards made from strong composite material to help protect internal components.
Part number: XR351151
£8.99
Click for more details
Quantity
1
2
3
4
5
Front & Rear Bumber XB8
Tough composite bumpers for XB8. Set of two (front / rear)
Part number: XR351200
£4.99
Click for more details
Quantity
1
2
3
4
5
Body Post XB8
Composite body posts. Set of two (front / rear)
Part number: XR351300
£4.99
Click for more details
Quantity
1
2
3
4
5
In Stock
XB808 Body Posts
Strong composite body post set includes one of each front & rear body posts.
Part number: XR351301
£3.99
Click for more details
Quantity
1
2
3
4
5
XT8 Body Posts
Composite bodypost set includes one of each front & rear body posts. Requires 2 sets for XT8
Part number: XR351308
£3.99
Click for more details
Quantity
1
2
3
4
5
Foam Washer for Body Posts (4)
High-quality foam washers for body posts. Set of 4
Part number: XR351310
£3.99
Click for more details
Quantity
1
2
3
4
5
In Stock
XT8 Graphite Body Protector (F+R)
CNC-machined front and rear upper body protectors made from premium-grade graphite material, specially designed to protect the body over damage.
Part number: XR351311
£19.99
Click for more details
Quantity
1
2
3
4
5
XB808 Composite Rear Body Post - Long
Strong composite rear body post with elongated design to minimize the body breakage around the body post openings. Fits XB808
Part number: XR351330
£3.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Graphite Upper Plate XB8
CNC-machined graphite front plate for XB8. Countersunk holes for flathead screws
Part number: XR351340
£16.99
Click for more details
Quantity
1
2
3
4
5
XB808 Graphite Upper Plate
Authentic XRAY optional lightweight graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Fits XB808.
Part number: XR351341
£13.99
Click for more details
Quantity
1
2
3
4
5
XB808E Graphite Upper Plate
Authentic XRAY lightweight graphite front plate is CNC-machined from high-grade carbon graphite, ensuring highest strength with lightest weight. Fits XB808E.
Part number: XR351342
£13.99
Click for more details
Quantity
1
2
3
4
5
Alu Upper Plate 7075 T6 (4mm)
Front upper plate designed to increase rigidity and strength. CNC-machined from highest-grade 4mm-thick 7075 T6 Swiss aluminum. Stylish XRAY black finish with silver edging.
Part number: XR351345
£26.99
Click for more details
Quantity
1
2
3
4
5
XB808 Composite Upper Plate
Composite upper plate for XB808 made from tough molded composite.
Part number: XR351349
£3.99
Click for more details
Quantity
1
2
3
4
5
XB808 Front Alu Brace Swiss 7075 T6 (5Mm) - Hard Coated
Authentic XRAY front alu brace for XB808 is CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life.
Part number: XR352087
£27.99
Click for more details
Quantity
1
2
3
4
5
Composite Front Brace
Front brace made from tough molded composite. Using the composite brace will make the car more flexible and forgiving, thus making the car easier to drive. Recommended for bumpy tracks.
Part number: XR352089
£8.99
Click for more details
Quantity
1
2
3
4
5
1/8 Rear Wing White
Aerodynamic rear wing molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage
Part number: XR353510
£6.99
Click for more details
Quantity
1
2
3
4
5
Rear Wing - Black
Aerodynamic rear wing (black) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
Part number: XR353515
£6.99
Click for more details
Quantity
1
2
3
4
5
Rear Wing - Orange
Aerodynamic rear wing (orange) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
Part number: XR353516
£6.99
Click for more details
Quantity
1
2
3
4
5
Rear Wing - Pink
Aerodynamic rear wing (pink) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
Part number: XR353518
£6.99
Click for more details
Quantity
1
2
3
4
5
Rear Wing - Yellow
Aerodynamic rear wing (yellow) molded from a very flexible composite mixture. All edges in critical areas are reinforced to prevent breakage.
Part number: XR353519
£6.99
Click for more details
Quantity
1
2
3
4
5
Rear Wing Post XB8
Rear wing posts made of tough composite. Complete set of 4 pieces
Part number: XR353520
£9.99
Click for more details
Quantity
1
2
3
4
5
Composite Adj. Shim for
Tough molded composite shim set used for prolonging or shortening the rear wing for increased or decreased rear traction
Part number: XR353530
£4.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Alu Rear Wing Mount Brace (2)
CNC-machined aluminum braces for rear wing mount. Set of 2
Part number: XR353550
£8.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Composite Rear Wing
Rear wing mounting braces made from tough molded composite material. Set of self-tapping screws included.
Part number: XR353559
£4.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Alu Rear Wing Shim (2Pcs)
Alu rear wing shim for XB and XT series buggies and truggies.
Part number: XR353561
£4.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Composite Rear Wing Shim - Black (2Pcs)
Molded composite rear wing shim for XB and XT series buggies and truggies. Provides additional support to prevent wing from pulling off of mounting screws.
Part number: XR353565
£1.99
Click for more details
Quantity
1
2
3
4
5
Graphite Radio Plate XB8
CNC-machined graphite radio plate. All screw holes are countersunk
Part number: XR356110
£30.26
Click for more details
Quantity
1
2
3
4
5
XB808 Graphite Radio Plate
CNC-machined radio plate from premium high-grade graphite material ensures great strength while remaining very light.
Part number: XR356111
£25.99
Click for more details
Quantity
1
2
3
4
5
XB808 Graphite Radio Plate for Long Chassis
CNC-machined radio plate from premium high-grade graphite material ensures superior strength while remaining very light. Designed for use with XB808 long chassis (#351103).
Part number: XR356112
£25.99
Click for more details
Quantity
1
2
3
4
5
XB808E Graphite Throttle Servo Top Plate
CNC-machined graphite receiver case top plate from premium-grade graphite material ensures great strength while remaining very light.
Part number: XR356113
£11.99
Click for more details
Quantity
1
2
3
4
5
XB808E Graphite Steering Servo Top Plate
XB808E CNC-machined graphite steering servo top plate from premium-grade graphite material ensures great strength while remaining very light.
Part number: XR356114
£11.99
Click for more details
Quantity
1
2
3
4
5
Alu Radio Plate 7075 T6 (3mm)
Aluminum radio plate designed to increase rigidity and strength. CNC-machined from highest-grade 3mm-thick 7075 T6 Swiss aluminum. Stylish XRAY black finish with silver edging
Part number: XR356115
£31.43
Click for more details
Quantity
1
2
3
4
5
Alu Radio Plate 7075 T6 (3mm) - V2
Newly redesigned (version 2) radio plate features a lay-down steering servo and upright throttle/brake servo arrangement; both servos are placed on the chassis centerline.
Part number: XR356116
£33.76
Click for more details
Quantity
1
2
3
4
5
XB808 11 Graphite Radio Plate
Radio plate CNC-machined from premium high-grade graphite material ensures great strength while remaining very light.
Part number: XR356117
£25.99
Click for more details
Quantity
1
2
3
4
5
X10 Graphite Chassis 2.5mm
CNC-machined 4-cell chassis for XRAY X10 is custom-manufactured from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing.
Part number: XR371000
£75.99
Click for more details
Quantity
1
2
3
4
5
X10 Link Graphite Chassis 2.5mm
CNC-machined 4-cell chassis for XRAY X10 Link is custom-manufactured from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing.
Part number: XR371001
£75.99
Click for more details
Quantity
1
2
3
4
5
X10 Graphite Front Bumper & Shims 2.5mm
CNC-machined front lower bumper for XRAY X10 is custom-manufactured from heavy-duty 2.5mm high-grade graphite material for strength, lightness, and durability to withstand the rigors of heavy crashes.
Part number: XR371040
£34.99
Click for more details
Quantity
1
2
3
4
5
X10 Graphite Mounting Plate Risers 2.5mm (2)
CNC-machined mounting plate risers made from 2.5mm thick premium-grade graphite material go between graphite arm mount plate and chassis.
Part number: XR371050
£3.99
Click for more details
Quantity
1
2
3
4
5
X10 Graphite Arm Mount Plate 2.5mm
CNC-machined arm mounting plate made from 2.5mm thick premium-grade graphite material, used for mounting the front suspension.
Part number: XR371060
£26.99
Click for more details
Quantity
1
2
3
4
5
X10 Graphite Rear Brace 2.5mm
CNC-machined rear brace made from 2.5mm thick premium-grade graphite material, used for rear body post mounting.
Part number: XR371070
£15.99
Click for more details
Quantity
1
2
3
4
5
X10 Link Graphite Rear Brace 2.5mm
CNC-machined rear brace made from 2.5mm premium-grade graphite material, used for rear body post mounting.
Part number: XR371071
£15.99
Click for more details
Quantity
1
2
3
4
5
X10 Graphite Front Brace 2.0mm
CNC-machined front brace made from 2.5mm thick premium-grade graphite material,used for bracing the front suspension.
Part number: XR371085
£9.99
Click for more details
Quantity
1
2
3
4
5
X10 Graphite Plate for Mounts & Antenna Holder 2.5mm
CNC-machined plate for XRAY X10 Link, made from 2.5mm premium-grade graphite material.
Part number: XR371090
£7.99
Click for more details
Quantity
1
2
3
4
5
XII Chassis - 2.0mm Graphite
CNC-machined 4-cell chassis for XRAY XII is custom-manufactured from 2.0mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing.
Part number: XR371100
£44.99
Click for more details
Quantity
1
2
3
4
5
XII Chassis - 2.5mm Graphite
Optional CNC-machined 4-cell chassis for XRAY XII is custom-manufactured from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing.
Part number: XR371101
£49.99
Click for more details
Quantity
1
2
3
4
5
XII Link Graphite Chassis 2.5mm
CNC-machined 4-cell chassis for XRAY XII is custom-manufactured from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing.
Part number: XR371102
£49.99
Click for more details
Quantity
1
2
3
4
5
Graphite 2.0mm Rear Pod Lower Plate
CNC-machined rear pod lower plate for XRAY XII, made from 2.0mm premium-grade graphite material. Countersunk holes for smooth bottom.
Part number: XR371140
£19.99
Click for more details
Quantity
1
2
3
4
5
Graphite 2.5mm Rear Pod Lower Plate
Optional CNC-machined rear lower chassis plate for XRAY XII is custom-manufactured from 2.5mm high-grade graphite material with a specially-designed compound for carpet racing and asphalt racing.
Part number: XR371141
£22.99
Click for more details
Quantity
1
2
3
4
5
Link Graphite Rear Pod Lower Plate 2.5mm
CNC-machined rear pod lower plate for XRAY XII made from 2.5mm premium-grade graphite material.
Part number: XR371142
£22.99
Click for more details
Quantity
1
2
3
4
5
Fiberglass T-Bar 1.5mm - Wide
CNC-machined wide T-bar for XRAY XII, made from 1.5mm premium-grade fiberglass material.
Part number: XR371180
£9.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Composite Pod Link (2)
Molded composite pod links for XRAY XII Link rear pod.
Part number: XR371190
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Chassis Protector (2Prs)
Heavy-duty chassis protectors for XRAY XII made from tough composite material. Protects the front edges of the chassis during hard impacts.
Part number: XR371200
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Body Post (2Prs)
Heavy-duty body post set for XRAY XII made from molded composite material. Includes posts, body holder plates and pins.
Part number: XR371320
£3.99
Click for more details
Quantity
1
2
3
4
5
Alu Rear Bulkhead - Motor (Right)
CNC-machined motor-side rear bulkhead for XRAY XII made from premium extra-hard Swiss 7075 T6 aluminum, additionally black coated for long life and stylish look.
Part number: XR373010
£19.99
Click for more details
Quantity
1
2
3
4
5
Alu Rear Bulkhead - Left
CNC-machined LEFT side rear bulkhead for XRAY XII made from premium extra-hard Swiss 7075 T6 aluminum, additionally black coated for long life and stylish look.
Part number: XR373020
£19.99
Click for more details
Quantity
1
2
3
4
5
Alu Rear Bulkhead Brace
CNC-machined rear bulkhead brace for XRAY XII made from premium Swiss 7075 T6 aluminum.
Part number: XR373030
£7.99
Click for more details
Quantity
1
2
3
4
5
Alu Rear Brace Mount 16mm (2)
CNC-machined alu rear brace mount for XRAY XII Link.
Part number: XR373072
£5.99
Click for more details
Quantity
1
2
3
4
5
Rear Brace - Graphite 2.0mm
CNC-machined rear brace for XRAY XII, made from 2.0mm premium-grade graphite material.
Part number: XR373080
£13.99
Click for more details
Quantity
1
2
3
4
5
Link Rear Brace - Graphite 2.5mm
CNC-machined rear brace for XRAY XII, made from 2.5mm premium-grade graphite material.
Part number: XR373081
£13.99
Click for more details
Quantity
1
2
3
4
5
Composite Upper And Lower Pivot Brace
Matched set of molded-composite lower & upper pivot braces for link rear pod suspension of XRAY XII Link.
Part number: XR373090
£3.99
Click for more details
Quantity
1
2
3
4
5
Alu Friction Damper Post
CNC-machined alu friction damper post for XRAY XII.
Part number: XR373510
£5.99
Click for more details
Quantity
1
2
3
4
5
Composite Friction Damper Pad (2Pcs)
Molded composite friction damper pads for XRAY XII.
Part number: XR373520
£3.99
Click for more details
Quantity
1
2
3
4
5
Rear Pod Upper Plate - Graphite 2.0mm
CNC-machined rear pod upper plate for XRAY XII, made from 2.0mm premium-grade graphite material.
Part number: XR373540
£7.99
Click for more details
Quantity
1
2
3
4
5
Link Rear Pod Upper Plate - Graphite 2.5mm
CNC-machined rear pod upper plate for XRAY XII Link, made from 2.5mm premium-grade graphite material.
Part number: XR373541
£7.99
Click for more details
Quantity
1
2
3
4
5
Friction Damper Pad Spring (2Pcs)
Friction damper pad springs for XRAY XII.
Part number: XR373580
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Spring Holder (2)
Composite spring holder for XRAY XII Link.
Part number: XR373590
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite LiPo Battery Backstop (2)
Set of molded composite LiPo battery backstops to prevent LiPo battery movement on chassis.
Part number: XR376130
£3.99
Click for more details
Quantity
1
2
3
4
5
Composite Servo Mount (2Pcs)
Molded composite servo mount for XRAY XII features angled mounting faces to reduce unwanted bump steer.
Part number: XR376210
£3.99
Click for more details
Quantity
1
2
3
4
5
Center Graphite Servo Mount + Alu Stands - Set (Mid-Size)
XRAY Tweak-free Servo Mount Plate eliminates chassis tweak caused by improper servo mounting. Fits mid-size servos.
Part number: XR376215
£22.99
Click for more details
Quantity
1
2
3
4
5
Center Graphite Servo Mount + Alu Stands - Set (Micro)
XRAY Tweak-free Servo Mount Plate eliminates chassis tweak caused by improper servo mounting. Fits micro servos.
Part number: XR376216
£22.99
Click for more details
Quantity
1
2
3
4
5
X10 Alu Servo Mount (2)
CNC-machined alu posts for mounting mid-size steering servo.
Part number: XR376255
£8.99
Click for more details
Quantity
1
2
3
4
5
Composite Antenna Mount
Molded composite antenna mount and shock mount for XRAY XII.
Part number: XR376300
£3.99
Click for more details
Quantity
1
2
3
4
5
Fiberglass Solid Antenna Rod + Cap
Lightweight and strong fiberglass solid antenna rod for XRAY XII, includes plastic cap.
Part number: XR376310
£4.99
Click for more details
Quantity
1
2
3
4
5
Graphite Plate for Mounts & Antenna Holder
CNC-machined plate for XRAY XII Link, made from 2.5mm premium-grade graphite material.
Part number: XR376350
£4.99
Click for more details
Quantity
1
2
3
4
5
Alu Antenna Holder Mount (2)
CNC-machined alu antenna holder mount for XRAY XII Link.
Part number: XR376360
£5.99
Click for more details
Quantity
1
2
3
4
5
Alu Antenna Holder Mount 26.5mm (2)
CNC-machined alu antenna holder mount for XRAY X10 Link.
Part number: XR376361
£5.99
Click for more details
Quantity
1
2
3
4
5
Composite Micro Chassis
Stock chassis for M18. CAD-designed and molded from tough plastic composite.
Part number: XR381100
£16.99
Click for more details
Quantity
1
2
3
4
5
In Stock
Micro 6-Cell Graphite Chassis - CNC Machined
CNC-machined chassis made from premium-quality graphite. Stock chassis for M18 PRO. Will also fit M18 when used with longer 381141 top deck
Part number: XR381116
£37.99
Click for more details
Quantity
1
2
3
4
5
NT18 Alu Chassis - CNC
CNC-machined tough 7075 T6 alu chassis for NT18. Includes integrated rear composite bumper with two positions for rear shocks for comfortable dampening adjustment.
Part number: XR381120
£26.99
Click for more details
Quantity
1
2
3
4
5
NT18MT Alu Chassis - CNC Machined 7075 T6
CNC-machined 7075 T6 alum chassis for NT18MT, will fit also NT18T
Part number: XR381131
£26.99
Click for more details
Quantity
1
2
3
4
5
M18 PRO Graphite Chassis, Top Deck, Batt. & Bumper Holder Set -
M18 PRO chassis set in black graphite finish
Part number: XR381152
£56.99
Click for more details
Quantity
1
2
3
4
5
M18PRO LiPo Graphite Set - Blue
M18 PRO chassis set in blue stylish graphite finish. Includes CNC-machined graphite parts
Part number: XR381155-B
£56.99
Click for more details
Quantity
1
2
3
4
5
M18PRO LiPo Graphite Set - Black
M18 PRO chassis set in black stylish graphite finish. Includes CNC-machined graphite parts (chassis, top deck, battery holder and top bumper upper holder), molded composite parts (battery backstops, rear bumper), alu LiPo battery strap posts and mounting
Part number: XR381155-K
£56.99
Click for more details
Quantity
1
2
3
4
5
Composite Micro Chassis M18T
Chassis for M18T made from tough composite material. Strategically designed for optimum strength and durability
Part number: XR381160
£11.99
Click for more details
Quantity
1
2
3
4
5
Graphite Micro Truck
Conversion set for XRAY M18 Micro Truck
Part number: XR381172
£66.99
Click for more details
Quantity
1
2
3
4
5
Graphite Micro Truck Conversion Set - Black
Conversion set for XRAY M18 Micro Truck
Part number: XR381173
£66.99
Click for more details
Quantity
1
2
3
4
5
Composite Top Deck M18T
Top deck for M18T made from tough composite material keys into front and rear gear cases
Part number: XR381180
£6.99
Click for more details
Quantity
1
2
3
4
5
Composite Top Deck NT18T
Molded composite top deck for maximum stability of the NT18T
Part number: XR381181
£6.99
Click for more details
Quantity
1
2
3
4
5
Composite Top Deck NT18MT
Molded composite top deck for NT18MT (includes built-in antenna mount), will fit also NT18T
Part number: XR381182
£6.99
Click for more details
Quantity
1
2
3
4
5
Lower Front Bumper
Composite lower front bumper holder.
Part number: XR381200
£5.99
Click for more details
Quantity
1
2
3
4
5
Lower Front & Rear Bumper M18T
Lower front and rear bumpers for M18T made from tough composite material. Strategically designed for optimum strength and durability.
Part number: XR381210
£5.99
Click for more details
Quantity
1
2
3
4
5
M18 Upper Holder for Bumper - Graphite
CNC-machined graphite upper bumper holder for M18 or M18 PRO.
Part number: XR381213
£9.99
Click for more details
Quantity
1
2
3
4
5
Foam Bumper - Blue
High-density front foam bumper, blue in colour.
